Apportionment of ambient primary and secondary fine particulate matter at the Pittsburgh National Energy Laboratory particulate matter characterization site using positive matrix factorization and a potential source contributions function analysis

Fine particulate matter (PM2.5) concentrations associated with 202 24-hr samples collected at the National Energy Technology Laboratory (NETL) particulate matter (PM) characterization site in south Pittsburgh from October 1999 through September 2001 were used to apportion PM2.5 into primary and secondary contributions using Positive Matrix Factorization (PMF2). Input included the concentrations of PM2.5 mass determined with a Federal Reference Method (FRM) sampler, semi-volatile PM2.5 organic material, elemental carbon (EC), and trace element components of PM2.5. A total of 11 factors were identified. The results of potential source contributions function (PSCF) analysis using PMF2 factors and HYSPLIT-calculated back-trajectories were used to identify those factors associated with specific meteorological transport conditions. The 11 factors were identified as being associated with emissions from various specific regions and facilities including crustal material, gasoline combustion, diesel combustion, and three nearby sources high in trace metals. Three sources associated with transport from coal-fired power plants to the southeast, a combination of point sources to the northwest, and a steel mill and associated sources to the west were identified. In addition, two secondary-material-dominated sources were identified, one was associated with secondary products of local emissions and one was dominated by secondary ammonium sulfate transported to the NETL site from the west and southwest. Of these 11 factors, the four largest contributors to PM2.5 were the secondary transported material (dominated by ammonium sulfate) (47%), local secondary material (19%), diesel combustion emissions (10%), and gasoline combustion emissions (8%). The other seven factors accounted for the remaining 16% of the PM2.5 mass. The findings are consistent with the major source of PM2.5 in the Pittsburgh area being dominated by ammonium sulfate from distant transport and so decoupled from local activity emitting organic pollutants in the metropolitan area. In contrast, the major local secondary sources are dominated by organic material.     

The Best Laid Plans: Community-Based Natural Resource Management (CBNRM) Group Capacity and Planning Success

As community-based natural resource management (CBNRM) increases in popularity, the question of the capacity of such groups to successfully manage natural resources becomes increasingly relevant. However, few studies have quantifiably analyzed how the amount or type of capacity in a CBNRM organization directly affects the outputs or the environmental outcomes produced. This paucity of research exists in part due to the diversity of indicators for CBNRM group capacity, as well as the ensuing debate over how to best define and measure success in CBNRM initiatives. Although concrete outputs vary widely, many efforts center on creating natural resource management plans (RMPs). The primary objective of our research was to explore the link between capacity and RMP implementation success, as perceived by practitioners among CBNRM groups across Illinois. A short online survey was constructed, utilizing findings from focus groups in combination with an extensive literature review, to measure CBNRM participants’ (n = 190) perceptions of 10 key capacity indicators and RMP implementation success. Results show that capacity perceptions varied significantly among respondents in low, moderate, and high RMP implementation success groups, and that group capacity was predictive of the degree of perceived RMP implementation success. Further, our findings suggest that bonding social capital and outreach are crucial in predicting low versus moderate RMP success, while leadership, motivation, and vision best distinguish the moderately successful and highly successful groups.     

Reduction in Residential Chromium Following Site Remediation

ABSTRACT

The purpose of this study was to determine the influence of chromate production waste site remediation on residential Cr concentrations in house dust. Twenty-three homes in Jersey City, NJ, were identified as having had high (>500 u,g/gm, median 739 u,g/gm), medium (100-400 u,g/gm, median 245 u,g/gm), or low (<100 u,g/gm, median 48 u,g/ gm) Cr in house dust during a study conducted in 19921993 prior to site remediation. House dust samples were collected on four visits from each home between November 1996 and February 1998, extracted with HNO₃, and analyzed for Cr with an inductively coupled plasma-mass spectrometer. Homes that had low Cr concentrations in 1992-1993 continued to have low Cr concentrations (median 1 u,g/g). In contrast, substantial declines in Cr concentrations were found in the house dust collected from homes located near the remediated waste sites: previously high-level homes had a median of 50 u,g/g and mid-level homes had a median of 34 u,g/g. Site remediation had a beneficial effect on household loadings of Cr, since no differences in post-remediation house dust Cr concentrations were found among the three groups.     

Comparative embryotoxicity of a pentabrominated diphenyl ether mixture to common terns (Sterna hirundo) and American kestrels (Falco sparverius)

Concentrations of polybrominated diphenyl ethers (PBDEs) in Forster’s tern (Sterna forsteri) eggs from San Francisco Bay have been reported to range up to 63 μg g⁻¹ lipid weight. This value exceeds the lowest-observed-adverse-effect level (1.8 μg g⁻¹ egg wet weight; ∼32 μg⁻¹ lipid weight) reported in an embryotoxicity study with American kestrels (Falco sparverius). As a surrogate for Forster’s terns, common tern (Sterna hirundo) eggs were treated by air cell injection with corn oil vehicle (control) or a commercial penta-BDE formulation (DE-71) at nominal concentrations of 0.2, 2, and 20 μg g⁻¹ egg. As a positive control, kestrel eggs received vehicle or 20 μg DE-71 g⁻¹ egg. In terns, there were no effects of DE-71 on embryonic survival, and pipping or hatching success; however, treated eggs hatched later (0.44 d) than controls. Organ weights, organ-to-body weight ratios, and bone lengths did not differ, and histopathological observations were unremarkable. Several measures of hepatic oxidative stress in hatchling terns were not affected by DE-71, although there was some evidence of oxidative DNA damage (8-hydroxy-deoxyguanosine; 8-OH-dG). Although DE-71 did not impair pipping and hatching of kestrels, it did result in a delay in hatch, shorter humerus length, and reduced total thyroid weight. Concentrations of oxidized glutathione, reduced glutathione, thiobarbituric acid reactive substances, and 8-OH-dG in liver were greater in DE-71-treated kestrels compared to controls. Our findings suggest common tern embryos, and perhaps other tern species, are less sensitive to PBDEs than kestrel embryos.     

Stable carbon isotope composition (δ13C values) of the halogenated monoterpene MHC-1 as found in fish and seaweed from different marine regions

Six samples of the red seaweed Plocamium cartilagineum (two both from Helgoland/Germany, Ireland, and the Antarctic) were analyzed by stable isotope analysis. The bulk δ(13)C values (-31 to -38‰) confirmed that this seaweed was exceptionally highly depleted in (13)C. The δ(15)N values were in the reported range for algae, and a moderate correlation between (13)C and (15)N content was observed. These measurements indicated that the season had a higher impact on the δ(13)C values than the location. Compound specific carbon isotope analysis by gas chromatography coupled with isotope ratio mass spectrometry (GC-IRMS) was used to verify an even stronger depletion in (13)C in the halogenated natural product (HNP) MHC-1 isolated from the seaweed samples. The δ(13)C values of MHC-1 in the range -42 to -45‰ are the lightest determined to date for polyhalogenated compounds in the molecular mass range between 250 and 800 Da. MHC-1 was also isolated from two fish samples. The much higher (13)C content in MHC-1 from the fish samples (-35.6 to -39.2‰) indicated carbon isotope enrichment due to partial transformation. In processes such as the reductive debromination, the partial transformation is associated with an increase in the (13)C content in the remaining non-metabolized share of a compound. Stable isotope analysis may thus provide insights into the degree of transformation of HNPs in environmental samples.     

How Widely Applicable is River Basin Management? An Analysis of Wastewater Management in an Arid Transboundary Case

The basin scale has been promoted universally as the optimal management unit that allows for the internalization of all external effects caused by multiple water uses. However, the basin scale has been put forward largely on the basis of experience in temperate zones. Hence whether the basin scale is the best scale for management in other settings remains questionable. To address these questions this paper analyzes the economic viability and the political feasibility of alternative management options in the Kidron/Wadi Nar region. The Kidron/Wadi Nar is a small basin in which wastewater from eastern Jerusalem flows through the desert to the Dead Sea. Various options for managing these wastewater flows were analyzed ex ante on the basis of both a cost benefit and a multi-criteria analysis. The paper finds that due to economies of scale, a pure basin approach is not desirable from a physical and economic perspective. Furthermore, in terms of political feasibility, it seems that the option which prompts the fewest objections from influential stakeholder groups in the two entities under the current asymmetrical political setting is not a basin solution either, but a two plant solution based on an outsourcing arrangement. These findings imply that the river basin management approach can not be considered the best management approach for the arid transboundary case at hand, and hence is not unequivocally universally applicable.     

A comparative analysis of colour preferences in temperate and tropical social bees

The spontaneous occurrence of colour preferences without learning has been demonstrated in several insect species; however, the underlying mechanisms are still not understood. Here, we use a comparative approach to investigate spontaneous and learned colour preferences in foraging bees of two tropical and one temperate species. We hypothesised that tropical bees utilise different sets of plants and therefore might differ in their spontaneous colour preferences. We tested colour-naive bees and foragers from colonies that had been enclosed in large flight cages for a long time. Bees were shortly trained with triplets of neutral, UV-grey stimuli placed randomly at eight locations on a black training disk to induce foraging motivation. During unrewarded tests, the bees’ responses to eight colours were video-recorded. Bees explored all colours and displayed an overall preference for colours dominated by long or short wavelengths, rather than a single colour stimulus. Naive Apis cerana and Bombus terrestris showed similar choices. Both inspected long-wavelength stimuli more than short-wavelength stimuli, whilst responses of the tropical stingless bee Tetragonula iridipennis differed, suggesting that resource partitioning could be a determinant of spontaneous colour preferences. Reward on an unsaturated yellow colour shifted the bees’ preference curves as predicted, which is in line with previous findings that brief colour experience overrides the expression of spontaneous preferences. We conclude that rather than determining foraging behaviour in inflexible ways, spontaneous colour preferences vary depending on experimental settings and reflect potential biases in mechanisms of learning and decision-making in pollinating insects.     

TiO2/β-SiC foam-structured photoreactor for continuous wastewater treatment

Introduction

This study of photocatalytic degradation of wastewater was carried out in alveolar cell ??-SiC foam-structured photocatalytic reactors working in a recirculation mode. The immobilization of TiO2 on ??-SiC foams was efficiently obtained through a sol?Cgel technique in acidic conditions.

Discussion

In order to optimize degradation yields obtained by the foam-structured prototype reactor for the photocatalytic water treatment, the operating conditions of the photoreactor have been investigated and the efficiency of the process was evaluated by measuring the photocatalytic degradation of Diuron (3-(3,4-dichlorophenyl)-1,1-dimethyl-urea)) under UV irradiation. Kinetic studies were carried out by investigating the influence of different parameters controlling the reaction (TiO2 loading and ??-SiC foam cell size). The ageing of TiO2/??-SiC foam photocatalytic materials and the mineralization (TOC, Cl?, NO3? and NH4+) of Diuron were investigated.